-
Network-based intercom system consisting of an exchange unit
and dedicated master and door stations.
-
Single exchange can connect any combination of door and
master stations up to sixteen units.
-
Up to 80 exchanges can be included on a system for a total
of 1280 communication devices.
-
IP Direct master station (AN-8500MS ) and vandal resistant
door station (AN-8540DS), connect directly to a LAN/WAN and do not require
an exchange unit.
-
Efficient method of communicating over local or wide area
network using existing infrastructure.
-
Full compliment of PC Programmable functions and features
including Redial, Recall, Auto-dialing, Group Call, Group Searching, Absence
transfer, Call Forwarding, Call Hold, and Scan Monitor.
-
Automatic echo cancellation prevents clipping and ghosting
during hands-free simultaneous conversation.
-
Stations incorporate a built-in speaker to allow paging
through the units.
-
Paging through overhead speaker network using an external
amplifier with total broadcast capabilities of up to 160-zones with paging
and all-call paging.
-
Total system maintenance can be performed off-site using a
personal computer with provided software.
-
7kHz* communication frequency provides better clarity than
most telephones.
-
System occupies a very low amount of bandwidth.
The
AN-8000 Series is an IP network compatible intercom system employing packet
audio technology. Linking IP Intercom Exchanges capable of connecting up to 16
stations per exchange, Multiple Interface Units, and IP Stations to a LAN or WAN
network, generates an optimal system that can be constructed for in-house or
wide area information communications such as duplex conversations between
stations, periodical broadcasts, and BGM broadcasts. Combining 80 Exchanges,
Multiple Interface Units, and IP Stations creates systems with up to a total of
1,280 stations. The system’s “echo cancellation” feature provides hands-free
duplex conversation between stations. In addition, the Multiple Interface Unit
features a contact bridge function to be performed by way of contact input and
output control.